User manual

OPERATION MANUAL
VOC-probe for a comfortable indoor climate
Technical changes reserved B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
0141 0316-225 20.04.2016 Fon [phone] | Fax [phone] | [e-mail] | bb-sensors.com 3 / 10
1. Preface
Dear customer,
Thank you for purchasing this VOC sensor. We are pleased that you have decided on a product from B+B Thermo-Technik GmbH.
We hope that this product will give you many years of good service and that it will help you in your work.
You have purchased a device that was developed and produced to the latest technical standard. This product meets all requirements
of the applicable European and national guidelines. Please observe these operating instructions to keep the product in this state and
ensure safe operation. In the event of any unexpected malfunctions that you cannot resolve yourself, please contact one of our
service points or your retailer. We always strive to provide fast, expert assistance to spare you long down times.
These operating instructions are an important part of the product. They contain important information on how to start up and handle
the product.
2. General hazard and warning notices
Notes on Documentation 2.1.
Please read the following notes before commissioning! The symbols used in the operating instructions aim to raise awareness of
risks to safety. The symbol used cannot replace the text of the safety notice. For this reason, always read the text in full!
This symbol indicates a hazard to persons, material or the environment. Always comply with the information in the text to prevent
risks.
This symbol indicates important operating information and tips that are necessary for successfully performing the work step, and that
must be observed in order to achieve good working results.
Safety instructions 2.2.
Please read these instructions carefully in full before starting up the device. Observe and follow the indicated safety instructions, in
particular the safety instructions for devices powered by line voltage.
The product may only be used in line with its intended use as described in this manual. Any other usage is against the intended use
and will result in the loss of guarantee and exemption from liability. This also applies to modifications and any other alterations made
to the device.
Defective fuses may only be replaced by fuses that are identical in terms of tripping current, tripping characteristic and mechanical
dimensions. Bridged fuses represent a significant safety risk and are not permitted under any circumstances.
The connection terminals can be switched with line voltage. Contact with live components poses a life-threatening risk. Assembly or
maintenance work may only be carried out by trained personnel who are qualified to perform the work. Observe the applicable safety
rules. Assembly and servicing may only be performed when the device is disconnected from the voltage.
The product is intended exclusively for the purpose of controlling electrical equipment that have functions relevant to safety. Even in
normal operation, there is the risk of unexpected malfunctions due to a component failure or other deficiency. The user must ensure
that no consequential damage can occur as the result of a malfunction or undefined switching state on the relay. This applies above
all if heavy consumers like heaters or motors are being controlled.
The user must comply with the safety rules that apply to the special application. The device must be assembled in dry areas only.
Attention
Please avoid extreme mechanical and inappropriate exposure.
The device/product is not suitable for potential explosive areas and medical-technical applications.