User manual

OPERATION MANUAL
VOC-probe for a comfortable indoor climate
Technical changes reserved B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
0141 0316-225 20.04.2016 Fon [phone] | Fax [phone] | [e-mail] | bb-sensors.com 4 / 10
3. General information
This documentation contains information that must be observed to ensure safe and efficient use of the product.
Please read this documentation carefully in full and familiarize yourself with the product's operation before using it. Please keep this
document to hand so that you can refer to it as needed.
4. Symbols
Illustration
Meaning
Note
Note
Please read the following notes before using the device. The symbols used in
the operating instructions aim above all to raise awareness of safety risks. The
symbol used in each case cannot replace the text of the safety instruction.
Therefore, always read the text in full.
Observe the following
This symbol indicates important information and tips that are necessary for
successfully performing the work step and that must be observed in order to
achieve good working results
Warnings
Meaning
Warnings
Meaning
This symbol indicates a hazard to
persons, material or the environment
The information contained in the text
must be observed in order to prevent
risks
Warning against electromagnetic field (BGV A8,
GUV-V A8/W12)
Warning against hot surfaces (BGV
A8, GUV-V A8/W26), as well as hot
liquids or media
Warning against cold
(BGV A8, GUV-V A8/W17)
Warning against hot liquids and hot
media
Warning against dangerous electrical voltage
(BGV A8, GUV-V A8/W08)
Warning against substances at risk of
explosion
(BGV A8, GUV-V A8/W02)
Warning against explosive atmosphere
(BGV A8, GUV-V A8/W21)
Warning against moving machinery
(W29)
Warning against moving components
Electronic waste
Take protective measures against
electrostatic discharges on electronic
components
(DIN EN 61340-5-1, 61340-5-3)
5. Safety instructions
B+B Thermo-Technik GmbH shall assume no liability for damages that occur as a result of non-compliance with these safety
instructions and the operating manual.
Any deviation from the use described in the operating manual can lead to damage or failure of the device. Non-intended use can
also lead to risks such as short circuit, fire, electric shock, etc.
Preventing personal injury and damage to objects
 The measurement system may only be used by authorized personnel.