User manual

OPERATION MANUAL
Technical changes reserved
0141 0316-186 21.08.2015
Temperature probe DS18S20 with
PUR-cable and RJ12 connector
DescriptionDescription
Technical data
Temperature probe DS18S20 with PUR-cable and RJ12 connector
Temperature measuring range -55...+125 °C
Operation range -40...+130 °C
Accuracy ±0,5 °C (-10...+85 °C)
Sensor DS18S20
Probe Protection sleeve, stainless steel
1.4571; Ø6xL40 mm
Cable TPE/Cu/TPE, 3x0,14 mm²
2000 mm
Connection RJ12 connector
CE-conformance 2004/108/EG
EMV-noise emission EN 61000-6-3:2011
EMV-noise withstanding EN 61000-6-1:2007
Article Art.-No.
Temperature probe DS18S20 with cable 2 m DS1820-PUR-2M
Temperature probe DS18S20 with cable 5 m DS1820-PUR-5M
Temperature probe DS18S20 with cable 10 m DS1820-PUR-10M
Available probes
The reasonably priced probes with PUR-connection cable are meant
for measurement in open atmosphere, on surfaces or in non-aggressi-
ve gas medium. The probes are sealed and can bear water contact for
some time. However, long term immersion in liquid is not recommen-
ded.The models with stainless steel probe tube are chemically stable
and the tube portion of probe can be submerged in liquid, the stainless
steel (1.4571) does not get affected.
Temperature range
The Dallas temperature sensors are semiconductor sensors. The
un-housed sensors are suitable for temperature measurement in the
range of –55 … +125 °C. These temperature values are the nal limits
and operating above these values is not at all recommended, otherwi-
se the component can get damaged.
In addition, the allowable application temperature also depends on the
connection cable and type of protection sleeve used. The operation
range of the cable is -40...+130 °C, so the probe should not be used
above these values.
Characteristic features
• Ready made, plug-in type temperature probe
with DALLAS semi-conductor sensor DS18S20
• High quality PUR-connection cable
• Continuous operating temperature –40 ... +125 °C
• Sensor in stainless steel protective sleeve
• Splash waterproof
• RJ12 plug connector with breakage protection
• Resolution 0.06 °C
• Accuracy ±0.5 °C nominal (from -10...+85 °C),
as per data sheet of manufacturer
• Scratchpad memory for probe identication
Areas of application
• Monitoring of frozen goods as per cold storage regulations
• Building instrumentation
• Air conditioning systems
• Quality assurance
• Science, research and laboratories
• Industrial temperature logging
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon [phone] | Fax [phone] | [e-mail] | bb-sensors.com
1 / 2