Installation manual

LED’s in this product are Class 1 in accordance to

EN 60825-1.

Statement of EU Declaration of Conformity is available from

manufacturer upon request.

A2.2 USER GUIDE

Before plugging in become familiar with the controls.

With the guitar in playing position- on your lap – feel for the

wheels of the control panel at the soundhole. The control that is

closer to the fret board is the volume. The control closer to the

bridge is the XOM mix control.

XOM MIX CONTROL VOLUME

XOM

UST INCREASE

SOUNDHOLE

BRIDGE FRET BOARD

The volume is increased when that control is turned towards the

bridge and decreased in the opposite direction.

The A2.2 has the XOM mix control. When the mix control is turned

all the way towards the fret board, this is the XOM position- a 50

/ 50 mix of AST and UST is heard. This is the crossover mix of the

AST and UST. The crossover point is 800 Hz. From 800 Hz and up

is AST. 800 Hz and down is the UST. 50% is the high tones of the

AST and 50% is the low tones of the UST. See diagram below.