Installation manual

12
13
50 / 50 MIX OF AST & USTFULL RANGE UST
B-BAND LIMITED WARRANTY STATEMENT
In the unlikely event that your product needs guarantee service,
please contact your dealer, distributor or manufacturer. To avoid
any unnecessary inconvenience on your part, we recommend
you read this instruction manual carefully before seeking guar-
antee service.
YOUR GUARANTEE
By this Guarantee, B-Band guarantees the product to be free
from defects in materials and workmanship at the date of original
purchase for a period of one (1) year from that date.
If within the guarantee period the product is determined to be
defective (at the date of original purchase) due to improper
materials or workmanship, B-Band will, without charge for labor
or parts, repair or (at B-Band’s discretion) replace the product
or its defective parts subject to the terms and limitations below.
B-Band may replace defective products or parts with new or
refurbished products or parts. All products and parts replaced
become the property of B-Band.
TERMS
1. Guarantee services will be provided only if the original invoice
or sales receipt (indicating the date of purchase, model name
and dealer’s name) is presented with the defective product
within the guarantee period. B-Band may refuse free-of-charge
guarantee service if these documents are not presented or if they
are incomplete or illegible. This Guarantee will not apply if the
model name or serial number on the product has been altered,
deleted, removed or made illegible.
2. This Guarantee does not cover transport costs and risks associ-
ated with transport of your product to and from B-Band.
3. This guarantee does not cover:
a) periodic maintenance and repair or parts replacement due
MIX CONTROL
CENTER BLEND
UST XOM
SIDE OF MIX CONTROL SIDE OF MIX CONTROL
AST
UST
800 Hz
CROSSOVER
POINT
When the mix control is turned all the way towards the bridge
the sound is ONLY the UST pickup sound. Full range sound of
the UST. No AST sound.
With the mix control at any position you always hear the low tone
part of the UST pickup. This provides a very round and solid low
tone sound at any position.
The XOM mix control blends the higher tone sounds of both the
UST and AST.
Before plugging in the A2.2 make sure that the volume is turned
OFF and the XOM mix control is at the UST side. The amp or mixer
should be OFF, volume turned OFF and EQ setting at flat or OFF.
Plug into the amp or mixer and then plug into to the A2.2. Turn
the amp or mixer ON. Turn the volume up at the amp or mixer
to about “10 o’clock”. Slowly turn the A2.2 volume up, now you
should hear The UST pickup.
Next experiment with how the XOM mix control works. Once a
sound that you like is found, you can further experiment with the
EQ at the amp or mix to fine tune the sound.
Enjoy!