User Manual

SPECIFICATION/COMPONENT IDENTIFICATION

2-3

Units

MODEL

Metric US

SA 475 Tilt

DOOR OPENING AND HEIHGT:

Diameter mm in 1016 40

Height of door bottom above floor mm in 1611 63.43

DRIVE INFORMATION:

Number of motors Number 1 1

Size of motor kW Hp 30 40

WATER INLETS:

Hot water size DN in 50.8 2

Cold water size DN in 50.8 2

Additional water Inlet DN in - -

Average HOT water consumption / cycle liters gal - -

Average COLD water consumption / cycle liters gal - -

DRAIN OUTLETS AND CAPACITY:

Number of drains standard Number 2

Number of drains optional (water re – use) Number 2

Drain size mm in 203.2 8

Drain capacity liter / cycle g.p.m. 1050 277

STEAM INLET AND CONSUMPTION:

Steam inlet size DN in 38.1 1-1/2

Required steam to heat bath 10 ºF (5.55 ºC) LOW kg lbs - -

Required steam to heat bath 10 ºF (5.55 ºC) HIGH kg lbs - -

Average steam consumption kg / hr lbs / hr 94 207

AIR INLET AND CONSUMPTION:

Air inlet size DN in 12.7 1/2

Average air consumption per cycle m

cfm 0.01 0.1