Data Sheet

15PS100
LF Drivers - 15 Inches
1400 W continuous program power capacity
100 mm (4 in) copper voice coil
35 - 1000 Hz response
94.5 dB sensitivity
Double silicone spider with optimized compliance
Specification
Design
Parameters
Mounting & Shipping
Nominal Diameter 380 mm (15 in)
Nominal Impedance 8 ohm
Minimum Impedance 6.5 ohm
Continuous Power Handling 1400 W
Nominal Power Handling (AES) 700 W
Sensitivity (1W/1m) 94 dB
Frequency Range 35 - 1000 Hz
Voice Coil Diameter 100 mm (4 in)
Winding Material Copper
Former Material Glass Fibre
Magnet Material Ceramic Ring
Winding Depth 21 mm (0.83 in)
Magnetic Gap Depth 10.5 mm (0.4 in)
Flux Density 1.05 T
Surround Shape Triple Roll
Cone Shape Radial
Magnet Type Ceramic Ring
Spider Double Silicone
Design
Pole Design T-Pole
Recommended Enclosure vol 100 dm3 (3.53 ft3)
Recommended tuning freq. 40 Hz
Fs 33 Hz
Re 5.3 ohm
Qes 0.33
Qms 4.8
Qts 0.31
Vas 152 dm3 (5.3 ft3)
Sd 855 cm2 (132.5 in2)
EtaZero 1.8 %
Xmax +- 8 mm
Xvar +- 8 mm
Mms 145 g
Bl 22.5 Txm
Le 2.1 mH
EBP 100 Hz
Overall Diameter 393 mm (26.6 in)
Bolt Circle Diameter 374 mm (14.7 in)
Baffle Cutout Diameter 354 mm (13.9 in)
Depth 168 mm (6.6 in)
Flange and Gasket
Thickness
16 mm (0.62 in)
Air volume occupied by
driver
6.3 dm3 (0.22 ft3)
Net Weight 9.8 kg (11.1 lb)
Shipping Weight 11.1 kg (24.4 lb)
Shipping Box 420x420x200 mm
(16.5x16.5x7.9 in)
Service kit RCK15PS1008