Specs

15BG100
LF Drivers - 15 Inches
2000 W continuous program power capacity
100 mm (4 in) copper voice coil
35 - 1000 Hz response
94.5 dB sensitivity
FEA optimized Neodymium magnet assembly
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression
Specification
Design
Parameters
Mounting & Shipping
Nominal Diameter 380 mm (15 in)
Nominal Impedance 8 ohm
Minimum Impedance 6 ohm
Continuous Power
Handling
2000 W
Nominal Power Handling
(AES)
1000 W
Sensitivity (1W/1m) 94.5 dB
Frequency Range 35 - 1000 Hz
Voice Coil Diameter 100 mm (4 in)
Winding Material Copper
Former Material Glass Fibre
Magnet Material Neodymium Inside Slug
Winding Depth 26.5 mm (1.05 in)
Magnetic Gap Depth 11 mm (0.43 in)
Flux Density 1.25 T
Surround Shape Roll
Cone Shape Radial
Magnet Type Neodymium Inside Slug
Design
Spider Double Silicone
Pole Design T-Pole
Recommended
Enclosure vol
160 dm3 (5.65 ft3)
Recommended tuning
freq.
29 Hz
Fs 36 Hz
Re 5.1 ohm
Qes 0.49
Qms 5
Qts 0.44
Vas 83 dm3 (2.93 ft3)
Sd 855 cm2 (132.5 in2)
EtaZero 0.8 %
Xmax +- 10.5 mm
Xvar +- 14 mm
Mms 240 g
Bl 23 Txm
Le 1.6 mH
Parameters
EBP 73 Hz
Overall Diameter 393 mm (15.5 in)
Bolt Circle Diameter 374 mm (14.7 in)
Baffle Cutout Diameter 354 mm (13.9 in)
Depth 189 mm (7.44 in)
Flange and Gasket
Thickness
24 mm (0.94 in)
Air volume occupied by
driver
6 dm3 (0.21 ft3)
Net Weight 8.6 kg (18.9 lb)
Shipping Weight 10 kg (22 lb)
Shipping Box 420x420x200 mm
(16.5x16.5x7.9 in)
Service kit