Data Sheet

DE10
HF Drivers- 1.0 Inc hes
25 mm (1.0 in)
8 Ω
6.3 Ω
20 W
40 W
107.0 dB
2.0 - 18.0 kHz
2.5 kHz
25 mm (1.0 in)
Aluminium
0.1 mH
Mylar
1.55 T
Ferrite
SPECIFICATIONS
1
Throat Diameter
Nominal Impedance
Minimum Impedance
Nominal Power Handling
2
Continuous Power Handling
3
Sensitivity
4
Frequency Range
Recommended Crossover
5
Voice Coil Diameter
Winding Material
Inductance
Diaphragm Material
Flux Density
Magnet Material
90 mm (3.5 in)
53 mm (2.1 in)
0.8 kg (1.8 lb)
8
7.05 kg (15.54 lb)
235x235x165 mm (9.25x9.25x6.50 in)
MOUNTING AND SHIPPING INFO
Two M5 holes 180° on 76 mm (3 in) diameter
Overall Diameter
Depth
Net Weight
Shipping Units
Shipping Weight
Shipping Box
MMD0108
REPLACEMENT DIAPHRAGM
1. Driver mounted on B&C ME 10 horn.
2. 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated
nominal impedance.
3. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
5. 12 dB/oct. or higher slope high-pass filter.
B&C Speakers s.p.a.
Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. [phone] - Fax [phone] - [e-mail]