Specifications

PARAMETERS

DOOR STATUS INDICATORS

DOOR OPENER STATE

OPEN LED

GREEN

CLOSE LED

RED

DOOR STATUS

LED YELLOW

BEEPER

OPEN ON

OPENING

FLASHING

CLOSING

FLASHING

DOOR TRAVEL STOPPED FLASHING FLASHING

DOOR OBSTRUCTED WHEN OPENING FLASHING

DOOR OBSTRUCTED WHEN CLOSING FLASHING

BEEPS WHILE

DOOR IS MOVING

OPENER OVERLOADED

ALTERNATING

FLASHES

ALTERNATING

FLASHES

MAINS POWER INTERRUPTED

RAPID

FLASHES

BUTTONS FUNCTION

OPERATE Opens/Stops/Closes the door

Door Code Codes a transmitter button for OPERATE function

Force Margin Set + Plus (+) Increases the obstruction force margin setting

Force Margin Set + Minus (-) Decreases the obstruction force margin setting

Force Margin Set (then) Set Reloads the factory set default obstruction force margin setting

Close for 6 Secs Clears the door limits set positions. Limits then need to be reset.

Set (then power on) & hold until all LEDs are off Deletes control parameters excluding transmitter storage memory.

Door Code (then power on) & hold until all LEDs are off Deletes all transmitter stored in memory.

Set for 2 sec. Re-initialises the Opener to re-calculate force margins