Specifications

___________________________________________________H3000 Pilot Handbook
HB-3001-02
103
Fault 112 - Network Communication Error
Fault Description
No regular messages are being received by the Pilot computer from the
GPD via the Fastnet network, either the display is not transmitting
messages or the Pilot computer is not receiving them.
Remedial Action
1) Check the installation and operation of the Pilot display.
2) If Pilot responds to commands from other displays then the Pilot
computer is operating correctly. Check installation of Fastnet network
cable.
Fault 113 – Memory Card Changed: Reset End Stops
Fault Description
The memory card fitted is new or from another Pilot and the rudder end-
stops are no longer valid.
Remedial Action
Either reset and re-commission the Pilot or, if you are certain the memory
card has come from a Pilot of the same software version, carry out the
Dockside Commissioning procedure to set the new rudder end stops.
Fault 114 – Memory Card Error
Fault Description
Either the contents of the memory card fitted are not compatible with the
Pilot, the memory card is faulty or no card is present.
Remedial Action
1) Reset and re-commission the Pilot.
2) If a reset is unsuccessful it may be necessary to replace the Pilot
memory card, consult your local dealer.