Specifications

10
H3000 SUPERYACHT SUGGESTED SYSTEM
SUPERYACHT Advanced construction technology seamlessly meets onboard luxury
on superyachts along with the same standards of sophistication and flexibility that are
expected from their navigation systems. Custom superyachts and luxury production
yachts require a system that will integrate flexibly with other onboard systems. Traditional,
unobtrusive styling ensures that design is complementary to both the bridge layout and
living areas.
Additional options
Loadcells for safety monitoring
of rigging loads
Custom Projects can assist
with non-standard systems and
complex applications
Expansion processor for
additional sensor inputs
01 Fit 20/20HV
displays in social areas
to give guests an
overview of key data
02 Install a position
sensor for the vang,
calibrated to read zero
when the boom is
positioned at the optimum
mainsail furling height
03 Utilize RemoteVision
to access data and
configure remote displays
around the yacht
Tips
SUPERYACHTS OF 80FT +
HERCULES
PERFORMANCE CPU
GPDGFDANALOG
AIR
TEMP
REMOTEVISION
10/10 HV10/10 HV
40/40 HV
VERTICAL
MASTHEAD
UNIT
HALCYON GYRO
STABILISED
COMPASS
RUDDER ANGLE
SENSOR
PILOT DRIVE
AFT
DEPTH
SPEED & DEPTH
SHUT-OFF VALVES
BAROMETER
Benefits of this system
The 40/40HV displays were
designed specifically as a
mast display for superyachts,
whilst the 10/10HV provides
a compact display, for use on
control panels or in cabins.
A wide sensor range is
available to meet the specific
requirements of larger yachts;
an aft depth sensor allows
permanent secondary depth
reading, SOV allow retraction
of sensors for maintenance
and Ocean specification.
VMHU’s for wind measurement
above mast top fittings.
Hercules Motion provides
inputs for 3rd party sensors,
typical applications would be
to monitor boom height or to
provide draught measurement
for boats with lifting keels.
SELECTION OF DISPLAYS