User guide

40 |
External sensor wiring Serial Expansion | H5000 Installation
External sensor wiring
Serial Expansion
NMEA 0183 - GPS Antenna
12345678
Color Input
1 - Screen
2 Red 12 Volts
3 Black 0 Volts
4 --
5 Sensor Dependent TX_A (+)
6 Sensor Dependent TX_B ( - )
7 Sensor Dependent RX_A (+)
8 Sensor Dependent RX_B ( - )
 Note: A link wire may be required (as shown) between terminals 3 & 6
and 6 & 8 depending on the sensor.
Halcyon Gyro Stabilized Compass - HGSC
 Note: Fit the module jumper as previously described to bypass the
isolated power supply
CONNECTOR B
(BOTTOM TERMINALS)
12345678
Color Input
1 - Screen
2 Red 12 Volts
3 Black 0 Volts
4 --
5 Green HGSC Data out +
6 Blue HGSC Data out -
7 White HGSC Data in +
8 Yellow HGSC Data in -
 Note: A link wire is required between terminals 3 & 6
8