Instruction Manual

32 |

Operation | H5000 Operation Manual

Alarms

If you have the relevant sensor connected to the network you can enable that alarm by

selecting it/them from the alarm list.

Alarm on / o

Turn an alarm on or oﬀ from the alarm list. A tick symbol next to the alarm in the alarm list will

indicate that the alarm is on.

¼ Note: It is possible to enable / disable all alarms by selecting the ‘Alarms Enabled’ ﬁ eld from

the Alarms menu.

Alarm settings

1 Press MENU on an alarm that requires parameters to be set will take you to the Enabled / Set limit

menu.

2 Select Set limit

3 Set the required alarm parameter

4 Press the PAGE key once you have ﬁ nished editing

5 Select OK to conﬁ rm.