Instruction Manual

38 |

Operation | H5000 Operation Manual

Stop

Stops the timer. Press

the ENTER key again to restart the timer.

Reset

If the timer is running, selecting reset will automatically start counting down from the

originally set value for the race timer. If the timer is stopped when reset is selected it will set

the clock to the originally set value and will not begin the countdown until start is selected.

Remote displays

Remote displays can be individually set via the race display to show a single variable.

Con guring remote display data

Select the remote menu, then select the remote display (e.g. 20/20 HV) you wish to conﬁ gure.

¼ Note: The remote display will ﬂ ash on and oﬀ to indicate it has been selected for editing by

the race display.

Use the UP/DOWN and ENTER keys to navigate to a variable and select the variable to

display. Exit by pressing the PAGE key.

Lighting zone selection

Set the lighting zone on the display. All units in the selected lighting zone will mirror each

others light settings. Default setting is network.

¼ Note: Press and hold the MENU / LIGHTS key to get to the Lighting menu.