Instruction Manual

80 |
Operating variables | H5000 Operation Manual
Apparent wind angle
Apparent Wind Angle (AWA) is the angle of the wind relative to the bow of the boat. The value
displayed is back-calculated from the True Wind data so as to include True Wind Correction
data. Raw wind angle data from the masthead unit is displayed as Measured Wind Angle.
Variable name (default)
Function name
App. Wind Angle (AWA)
AWA
Units Degrees
Alarms N/A
Calibration
MHU Off set, Heel correction On/Off
AutoCal Off set routine.
Damping N/A
Apparent wind speed
Apparent Wind Speed (AWS) is the speed of the wind relative to the boat. The value displayed
is back-calculated from the True Wind data so as to include True Wind Correction data. Raw
wind speed data from the masthead unit is displayed as Measured Wind Speed.
Variable name (default)
Function name
App. Wind Speed (AWS)
AWS
Units kph, mph
Alarms N/A
Calibration
Hz/Kt
Speed Off set
Damping 0-9s
¼ Note: The calibration values are factory set based on wind-tunnel tested sample units and it
is not recommended to change these. The option to change them exists for advanced users
who may choose to individually test masthead units to obtain specifi c calibration data. Both
calibration values are set to 1.04 by default.
Average speed
Average Speed (AVS) is a Trip Function that displays the average Boat Speed [speed through
the water] since the Trip Log was started.
In simple terms this can be calculated as:
Average Speed =
Trip Log
Trip Time
Variable name (default)
Function name
Average Speed (AVS)
AVG SPD
Units kt, mph, kph
Alarms N/A
Calibration N/A
Damping N/A