User Manual

Dimensions

Mounting

H5000 PILOT COMPUTER

INSTALLATION GUIDE

*988-10673-001*

Masthead Unit

Graphic Display

H5000 Pilot Controller

GPS Antenna

System wiring

Micro-C CAN bus backbone

H5000 Computer Unit

Speed sensor

Depth sensor

H5000 Pilot Computer

Rudder Feedback Unit

Compass

Hydraulic Ram

Terminator

12 Volts

1 * H5000 Pilot Computer

4 * Fixing screws, 3.5 * 19 mm

1* Micro-C Drop cable (male)

1* Micro-C T-Joiner

Parts included

For product manuals, technical speciﬁcaƟons,

cerƟﬁcates and declaraƟons,

refer to the product website on:

www.bandg.com

211.0 mm (8.31")

195.0 mm (7.68")

65.5 mm (2.58")

92.0 mm (7.68")

196.0 mm (7.72")

12V

T T

7 8

12V

PAGE 1
Parts included H5000 PILOT COMPUTER INSTALLATION GUIDE Dimensions 2 4 211.0 mm (8.31") 195.0 mm (7.68") UP 1 3 1 2 3 4 1* 4* 1* 1* H5000 Pilot Computer Fixing screws, 3.5 * 19 mm Micro-C Drop cable (male) Micro-C T-Joiner 65.5 mm (2.58") 92.0 mm (7.68") 196.0 mm (7.72") Mounting System wiring 2 1 3 4 For product manuals, technical specificaƟons, cerƟficates and declaraƟons, refer to the product website on: 5 T T 12V 6 9 10 www.bandg.
PAGE 2
H5000 Pilot Computer Terminal access Drive units DRIVE ENGAGE SOL GND RET CMD MOTOR SOL-1 MOTOR SOL-2 SOL-1 SOL GND MOTOR SOL-1 MOTOR DRIVE MOTOR SOL-2 MOTOR SOL-1 MOTOR SOL-2 DRIVE MOTOR SOL-1 DRIVE CLUTCH H5000 Pilot Computer Terminal layout HYDRAULIC RAM POLARITY LEDS 30 A FUSE REVERSIBLE PUMP SOLENOID VALVE * ALARM SUPPLY DRIVE SIMNET RUDDER DRIVE ENGAGE ROTARY DRIVE REMOTE SCREEN NMEA0183 TERMINATION * Solenoid valves, 12 V DC or 24 V DC, powered from H5000 Pilot Computer.