Installation manual

| 21

Display | B&G Triton Display Installation Manual

DRAFT COPY

System setup

In display setup you can set the lighting zone, enter night mode and

change the lighting level.

¼ Note: Pressandholdthe‘Enter’keyfor3secondswilltakeyou

directly to the display setup lighting level screen. If the lighting level

is set below 5 it will automatically increase to 5. Use the up and

downkeystosetthedesiredlevelandpress‘Enter’toconrm.

Lighting zone

All units in the selected lighting zone will mirror each other’s light

settings. Default setting is Network.

Night mode

Change the display to night mode colour pallet. All displays in the

selected lighting zone will also change to night mode.

Lighting level

Adjustthebacklightlevelfrom1-10.

Time & Date

From the time and date menu you can set your preferred time /

date format and local time oﬀset. Once complete select Save to save

your settings and exit.

¼ Note: Local time is calculated based on UTC provided via a GPS unit

connected to the network.