Installation manual
28 |
Display | B&G Triton Display Installation Manual
The operator will be noted when the auto select process is
completed.
¼ Note: If more than one source is available on the network you can
chose your preferred source from the sources menu. See “Manual
sourceselection”formoreinformation.
Manual source selection
If more than one source is available for an item, the preferred source
may be selected manually. As an example, the following illustrations
show how the compass source is changed.
Select the preferred data source. The selected source will be
indicated by a tick in the check box.
Device list
Shows a list of devices connected to the Network.