Installation manual

40 |
Autopilot | B&G Triton Display Installation Manual
Boat Type
Type of boat selected will affect the steering parameters, and the
functions available in the autopilot system. The options are: Planing,
Displacement, Sail and Outboard.
¼ Note: Wind mode is only available if boat type is set to sail.
Drive voltage (V)
Setsthedrivevoltagetypeto12or24V
Rudder Feedback Calibration
Make sure the unit is installed and aligned as per instruction in the
AC12/42Installationmanual.Therudderfeedbackcalibrationwill
set the correct relationship between the physical rudder movement
and the rudder angle readout.
Max starboard
• Manually move the helm to starboard until the rudder stops at
starboard lock hard over.
• The Max starboard angle is the angle read by the rudder feedback
unit before any adjustment is made.
• If the actual rudder angle is different from the angle displayed,
correct the reading with the Up/Down keys.
• Confirm Rudder feedback calibration to starboard by selecting Next.
Max port
• Manually move the helm to port until the rudder stops at port lock
hard over.
• Adjust the displayed angle the same way as for starboard rudder.
• Confirm Rudder feedback calibration to port by selecting Next.