Specifications

34 |
Setup | Triton Operator Manual
Reset to Factory
Resets the current display to the default settings. When the unit is restarted you will see the
original startup wizard asking you to set the display.
Warning: All settings for instrument and Pilot will be restored to fac-
tory default. The Pilot will need to be commissioned before use.
Simulator
Simulator mode sends simulated data to the display.
Warning: It is not advisable to enter simulator mode when using your
instrument system as a navigation aid.
Software Information
Shows the software version currently installed on the display. Press ‘Enter’ or the ‘Page’ key to
navigate back to the menu.
Diagnostics
Shows an overview of the data being transmitted on the network, The list shows the network
bus status, bus load as a percentage as well as quantity and type of data messages.
 Note: We recommend that you use this diagnostic tool as a basic overview of the network
status. For more detailed information it is suggested that you check the individual source
information via the device list.