Specifications

38 |
Autopilot| Triton Operator Manual
Autopilot symbols
More Pilot modes are available via a compatible chart plotter connected to the network. Any
Pilot mode selected via the chartplotter will be shown on the display. Below is a list of Pilot
modes and their symbols accessible via the Pilot controller..
Mode Symbol Function / Mode
S
Standby
A
Auto (Compass)
W
Wind
N
Navigation
NFU
Non Follow Up (Power steer)
 Note: The Pilot mode can be selected or changed at anytime via the display or compatible
chart plotter connected to the Network.
Selecting a Pilot mode
Press the ‘Auto’ key to activate the Pilot. Press the ‘Mode’ key for wind or long press for
navigation mode.
 Note: Wind mode can only be selected when the Pilot boat type is set to sail.
 Note: The Pilot must be in Auto mode before other modes can be selected.
 Note: Press the ‘Auto’ key to enter Auto mode or accept a tack/gybe or navigation course
change. Press the ‘Off ’ key to place the Pilot into Standby mode.
3 SEC
 Note: The display will not update until the Pilot engages the new selected mode.