Owner manual

12 |

Preparation | V90 Installation Manual

Preparation

Caution: Under extreme operating conditions, the

temperature of the rear heat-sink on this radio may

reach a surface temperature that is unsafe to touch.

Caution is advised to prevent possible skin burns.

¼ Note: You must obtain a Maritime Mobile Service Identity (MMSI)

for the vessel before you can use the Digital Selective Calling (DSC)

function of this radio. Consult your local maritime authority or radio

spectrum authority to obtain your MMSI.

Checklist

The following items are included in the V90 radio package:

Wired handset

• H90 wired handset with cradle

• 5 m handset connector cable, including mid-cable connector

• Flush mounting plate for handset connector cable socket

• Silicon cover for cable connector

• Handset fasteners:

• M3.5 x 15 mm selftapping screw x2 (cable mounting plate)

• M3.5 x 10 mm selftapping screw x2

• M3 x 40 mm selftapping screw x1

• M3.5 x 28 mm machine screw x2

• M3.0 x 40 mm machine screw x1

• M3.5 nut x2

• M3.0 nut x1

• Spring washers and ﬂat washers

Transceiver

• V90 transceiver unit

• 2 m power supply cable

• 8-pin terminal connector x4

• 2-pin terminal connector x2

• Special mounting bracket