Data Sheet
Abtastsystem
Wasserdurchflussmesser
Water Flow meter 2- 120 LPM
2269520-FCH-CE-PA.doc Technische Änderungen vorbehalten. Stand 6.2020 We reserve the right to make technical changes without notice.
B.I.O-TECH e.K. | Zeitlarner Str. 32 | D- 94474 Vilshofen | Germany
Tel: +49 (0) 8541-91 00 47 | Fax: +49 (0) 8541-96 89 98 0
E-Mail: info@btflowmeter.com | Internet: www.btflowmeter.com
Messprinzip
Ausgangssignal
Durchflussrichtung
Durchflussbereich
L/min.
Nennweite DN
Impulszahl
/ Liter
Viskosität der M
edien v
Messgenauigkeit
(v= 1 mPas)
Wiederholgenauigkeit
Betriebs/ Berstdruck/
Druckverlust bei Q
max.
Betriebstemperatur
Einbaulage
Anschluss
Material / Rotor / O
-
Ring
Achse / Lagerung
Spannungsversorgung
Strombelastung
I
max.
Gebe
rgewicht
Abmessung
in mm
Measurement principle
Sensing principle
Output: square wave
Flow direction
Flow range LPM
Flow nominal diameter
Pulses Output/ Litre
Viscosity v
Accuracy (v= 1 mPas)
Repeatability of
frequency response
Operating- burst
pressure / pressure loss
Running temperature
Installation position
Process Connection
Materials/ Rotor/ Gasket
Axle/ Bearing
Voltage supply
Output current
Weight
Dimensions in mm
Technische Daten
Technical
specification
Serie: FCH-CE-PA
Art.-Nr: 2269520
Anwendung: Wasser u.a. flüssige,
chemisch nicht aggressive Medien.
Application: water and other aqueous,
chemically
non aggressive liquids.
Turbine
Hall-Sensor berührungslos / non contacting
NPN + PNP push-pull
in Pfeilrichtung / at arrow-direction
5
-
12
0 L/ min
(H
2
O bei / at 20°C)
DN 25
ca. 34 Imp./ L (bei / at / H2O 20°C)
0,2- 10 mPas
+/- 2 % (bei gleichen Betriebsbedingungen)
+- 0,8 % (bei gleichen Betriebsbedingungen
+- 0,8 % (at the same operating conditions)
-0,5- 10 bar / > 17 bar (bei / at 20°C)
max.0,2 bar at Q max.
-10°C... + 100°C
beliebig / any
2x G 1 ¼” AG / Male thread (BSP)
PA 66 + 30 % GF, POM, O-Ring: NBR
Achse / Axle= SS 304 / Bearing POM
5…24
max.
VDC
13 mA
max.
240 Gramm
s. Zeichnung / see drawing
R* = integriert/ integrated R*>= 2k2
Steckerbelegung /
Electrical connection
PIN 1: +4,5 to 24 VDC
PIN 2: GND (0V)
- Masse-PIN: Signal
btflowmeter.com