Manual

Display

2sec, 5sec, 10sec,

20sec, Infinite

Set display time of menu on the screen.

Page 2/2

Return to the first page of DISPLAY menu.

To change the settings to any of the menu options, press their

corresponding function keys ( - ).

Persistence: The wavefrom persistence can be configured by changing the

Persist menu option of the Display menu page 1. Use the to

toggle between persistence timing.

Intensity and Brightness: The waveform intensity and the display grid

brightness can be adjusted by first pressing for intensity or

for grid brightness in the Display menu page 1. Then, use the or

arrow keys to increase or decrease the intensity or brightness

percentage respectively.

YT format: YT is the default format that displays the waveform of voltage

vs. time.

XY format: XY is the format that display the waveform as channel 1 (X) vs.

channel 2 (Y). When this format is used, the horizontal scale and position

keys cannot be used.

Below is an example of using XY mode with two sine waves for channel 1

and 2 with 90 degree offset.

Figure 16 - XY Mode