Manual

To set the pulse width for the pulse trigger condition, press in the

Pulse Trigger menu 1 to select Set Width and use or arrow

keys to adjust the width, which will be displayed when it is adjusted.

Figure 36 - Pulse Width Trigger Condition Display

Note: Trigger level cannot be changed while the Pulse Trigger Menu is

active because the SetWidth option shares the same arrow keys to make

changes.

Video Trigger

Video trigger can be used to capture waveforms of standard NTSC and

PAL/SECAM analog video signals.

Select Video under Type from the trigger menu.

Table 19 - Video Trigger Menu 1/2

Option

Setting

Description