Manual

27
EXT TRIG: Input connector for an external trigger source. Use the Trigger
Menu to select the “Ext” or “Ext/5” trigger source.
Probe Compensation: 1 kHz voltage probe compensation output and
ground. Use to electrically match the probe to the oscilloscope input
circuit.
Auto Setup
The 2530B/2532B Digital Storage Oscilloscopes have an Auto Setup
function that identifies the waveform types and automatically adjusts
controls to produce a usable display of the input signal.
Press the AUTO front panel button, and then press the menu option button
adjacent to the desired waveform as follows:
Figure 12 - Auto Setup