Instruction Manual

10
command.
TRCP
TRIG_COUPLING
ACQUISITION
Sets the coupling mode of
the specified trigger
source.
TRDL
TRIG_DELAY
ACQUISITION
Sets the time at which the
trigger is to occur.
TRLV
TRIG_LEVEL
ACQUISITION
Adjusts the trigger level of
the specified trigger
source.
TRMD
TRIG_MODE
ACQUISITION
the trigger mode.
TRSE
TRIG_SELECT
ACQUISITION
Selects the condition that
will trigger acquisition.
TRSL
TRIG_SLOPE
ACQUISITION
Sets the trigger slope of
the specified trigger
source.
UNIT
UNIT
ACQUISITION
Sets the unit of specified
trace.
VPOS
VERT_POSITION
DISPLAY
Adjusts the vertical
position of the FFT trace.
VDIV
VOLT_DIV
ACQUISITION
Sets the vertical
sensitivity.
VTCL
VERTICAL
ACQUISITION
Controls the vertical
position of the slope
trigger line.
WF
WAVEFORM
WAVEFORMTRANS
Gets the waveform from
the instrument.
WFSU
WAVEFORM_SETUP
WAVEFORMTRANS
Specifies amount of
waveform data to go to
controller.
WAIT
WAIT
ACQUISITION
Prevents new analysis
until current has been
completed.
XYDS
XY_DISPLAY
DISPLAY
Enables or disables to
display the XY format