Manual

55
LCD contrast and LCD light states are not saved.
Save/Load
STEP 1
- Press the Shift key
STEP 2
- Press the Enter key
STEP 3
- To save the waveform or setup status, a name with at least 7 characters
is required.
- To select the first character. Use the Up/Down
keys. And
press the Enter
key
The function of Load is to load the saved waveform and setup status.
If user only wants to load only setup status, load the user’s saved data
and press the Run
key.
Then system will run in loading setup status. (Run-scanning)
Load