Owner manual

* When PARAM is selected, setting parameters are loaded.

* When the spectrum is loaded, the 2650A series enters HOLD state and the current spectrum disappears,

replacing it with the loaded spectrum on main display.

When is pushed right after, the loaded spectrum and a current spectrum are

displayed together.

4. When is pushed, the loaded spectrum can be cleared on display.

18.5 Delete Function

When is pushed, DELETE menu is displayed as follows.

1. The file name to be deleted is selected from the specified device with , and the active area will

indicate this name. As for the number of search steps, it is the same as “18.4 Load Function”.

2. When is pushed, DELETE is executed. The file displayed in the active area is deleted at this

time.

3. Repeat step 1 and 2 above to delete more than one file.

18.6 Presetting (Initialization)

(For 2651, refer to “20. EMI test”)

When is pushed, the setting parameters are reset to the preset values as shown below.

Items

Parameters

Center frequency

1 GHz

Frequency span

20 MHz

Reference level

10 dBm

Offset

0.0 dB

Impedance

50 Ω

Sweep time

30 ms

Detection mode

Sample mode (SMPL)

RBW

100 kHz

VBW

30 kHz

Display scale

10 dB/div

F1 F2 F3 F4 F5 F6

RETURN

File Search Step

100

DELETE

EXECUTE

HOLD/RUN