Owner manual

4007B/4013B – Operating Manual

F4: INTENSITY – Adjusts the intensity of the LCD screen. Valid range is 1 – 9; 9 giving the

highest intensity and contrast.

3.6.3 SWEEP Key

Selects the Sweep Mode and allows entering sweep parameters Sweep Start, Sweep Stop

and Sweep Rate.

To select the sweep mode, press SWEEP, then press the function key that corresponds to

the desired Sweep menu option, as shown:

Sweep Menu

F1: ON/OFF – Enables/disables the sweep function. Select between Sweep ON or OFF.

F2: LIN – Selects the Linear sweep shape.

F3: LOG – Selects the Logarithmic sweep shape.

F4: SET – Defines the Sweep Start and Stop frequencies.

Set Sweep Menu

3.7 ON Key

Use this key to control the main output signal. When the output is active, the key will lit. By

default, this will be ON (enabled) from a power-up. This can be changed by changing the

OUT-ON settings from the utility menu.

3.8 Cursor Keys

Use these keys to move the cursor (when visible) either left or right. They are used in

conjunction with the rotary input knob to set the step size of the rotary input knob.

3.9 Rotary Input Knob