User Manual

Function Generators
Models 4017A & 4040A
Data sheet
Technical data subject to change
© B&K Precision Corp. 2012
v031212
www.bk precision.com
Tel.: [phone]
■ 0.2 Hz to 20 MHz
■ Sine, Square, Triangle,
Pulse, & Ramp output
■ Coarse and Fine tuning
■ AM & FM modulation
■ Burst operation
■ External frequency
counter to 30 MHz
■ Linear and log sweep
■ Variable duty cycle
■ Variable DC offset
■ cUL certified
■ 0.1 Hz to 10 MHz
■ Sine, Square, Triangle,
Pulse, & Ramp output
■ Coarse and Fine tuning
■ 5 digit LED display
■ Linear and log sweep
■ Variable duty cycle
■ Variable DC offset
■ cUL certified
4017A
10 MHz Sweep
Function Generator
4040A
20 MHz Sweep
Function Generator
These analog function generators offer familiar controls, stable
output, and reliable operation at budget-saving price points.
Spe ci fications 4017A 4040A
Fr equency Ch arac teristics
W
aveforms
S
ine, Square, Triangle, ±Pulse, ±Ramp
R
ange
0
.1 Hz to 10 MHz in 8 ranges
0
.2 Hz to 20 MHz in 8 ranges
Resolution 5 digits 5 digits
T
uning Range
1
0:1
1
0:1
Fine ±5% of coarse setting ±5% of coarse setting
V
ariable Duty Cycle
1
5:85:15 cont variable
1
5:85:15 cont variable
Operating Modes Normal, sweep, VCG Normal,sweep, VCG, AM, FM,burst
Output Characteristi cs
Impedance 50Ω ±10%
L
evel
2
0 V p-p Open circuit, 10V p-p into 50Ω
Amplitude Variable, 20 dB range typical
A
ttenuation
-
20 dB ±1dB
DC Offset Preset ±0.1 V typ Variable: ±10V open-circuit ±5 into 50Ω
S
ine Wave
D
istortion
≤
3% typical at 1 kHz
F
latness
±5% (.45 dB) 0.1 Hz to 8 MHz
±20% (2.0 dB) 8 MHz to 10 MHz
±5% (.45 dB) 10 Hz to 8 MHz
±20% (2.0 dB) 8 MHz to 20 MHz
Square wave
S
ymmetry
0
.1 Hz to 100 kHz <2%
0
.2 Hz to 100 kHz <2%
Rise time ≤ 30 ns
Triangle Wave Linearity: ≥ 98% to 100 kHz
TTL Output
Level 0.8V to 2.4V
Rise time ≤ 20 nS
Duty Cycle 50% typical
CMOS Output
Max. Frequency 2 MHz
Level 4V to 14V ±0.5 p-p cont. variable
Rise Time ≤ 120 nS
VCG (Voltage controlle d gene rator)
Input Voltage 0-10V ±1V causes a 100:1 frequency change
Impedance 10kΩ ±5%
Swe ep Ope ration
Mode LIN/LOG
Width 100:1 continuously variable
Rate 0.5 s to 30 s cont variable 20 ms to 2 s cont variable
Sweep Output 0 to 10 V 0 to 2 V
Start/Stop Frequencies NA Adjustable
Fr equency Cou nter
Accuracy Time base accuracy ±1 count
Time Base Accuracy ±10 ppm (23° ±5°C)
Display 5 digit LED
Mode NA INT or EXT
External Input
Frequency Does not apply 5 Hz to 30 MHz
Resolution Does not apply 0.1, 1, 10, 100, 1 kHz
Sensitivity Does not apply 25 mVrms
Gene ral
Power Source 120/230 VAC ±10%, 50/60 Hz, internal jumper selectable
Dimensions
4.5 x 11.75 x 10.575"
(140 x 298 x 264mm)
5.5 x 11.75 x 10.575"
(114 x 298 x 264mm)
Weight 4 lbs. (1.8 kg) 4.5 lbs. (2 kg)
Two Year Warranty
Supplied Accessories
Output Cable with BNC to Alligator Clips,
Instruction Manual Carrying Case (not included): LC-40
Model 4040A
AM MOD ULATION CH ARACTERISTICS
Source Internal, External
Modulation Ratio 0 to 100%
Int modulation 1 kHz
Ext Modulation DC to 500 kHz
Ext Sensitivity Less than 10V p-p for 100% modulation
FM MODU LATION CHARA CTERISTICS
Source Internal, External
Modulation Ratio 0 to 100%
Deviation 0 to 5%
INT Modulation 1 kHz
Ext Modulation DC to 500 kHz
Ext Sensitivity Less than 10V p-p for 100% modulation
BURST CHA RACTERISTIC
Source Internal, External
Burst Width Cont. variable from 5% to 90% of internal gating frequency
Repition Rate
0.5 Hz to 50 Hz, internal
DC to 500 kHz external
External Level TTL levels
Burst Frequency Determined by main generator frequency setting
Model 4040A