Owner's manual

100
:STARt <numeric value>
:LENGth <numeric value>
:SAVe
Point Rate
ARBitrary:PRATe <point rate>
This command is used to set the point rate. It is coupled
with the frequency of the waveform by the relation:
Frequency = 1/(Point Rate * Wavelength)
Thus changing the point rate will result in a change in
frequency.
Arguments
Type: Numeric
Units: S, mS, uS, nS
Range: 20nS to 50S
Rounding: to 4 digits
Command Type: Setting or Query
Setting
Syntax: :ARBitrary:PRATe<ws><point
rate>[units]
:ARBitrary:PRATe<ws>MINimum|MAXimum
Examples: :ARB:PRAT 100NS
Query
Syntax:
:ARBitrary:PRATe?[<ws>MINimum|MAXimum]
Response: NR3
Note: You can alternately use the RATE command.