Manual

ManualsBrandsB&K Precision ManualsGenerators4079 - Datasheet

Models 4076 and 4079 are versatile high performance function/arbitrary waveform generators with the

largest arbitrary memory depth in their class. The generators combine the ability to produce nearly any

conceivable arbitrary waveform with accuracy and precision and a DDS architecture offering easy to use

conventional function generator capabilities. Arbitrary waveforms have 14 bit amplitude resolution,

125 MSa/s sample rate and up to 4,000,000 points length. Waveforms can be output in continuous,

triggered, gated or burst modes. Front panel operation is straightforward and user-friendly. The

instruments can be remotely controlled using SCPI-compliant commands via RS232 or GPIB interface.

Extensive features such as internal or external AM, FM and FSK modulation along with versatile sweep

capabilities and variable edge pulse generation make these generators suitable for a wide range of applica-

tions including electronic design, sensor simulation, functional test or generation of I/Q modulated signals.

50 MHz Arbitrary Waveform/ Function Generators

Models 4076 & 4079

Industry Leading Performance

Common Features & Benefits

Dual Channel Model 4079

Data sheet

wwwwww..bbkk pprreecciissiioonn..ccoomm

Tel.: 714.921.9095

■ 14-bit, 125 MSa/s, 4,000 k point Arbitrary

Waveform Generator

■ 50 MHz Sine / 50 MHz Square waveforms

■ Predefined Pulse, Ramp, Triangle, Noise, Sin

(X)/X, Exponential and Gaussian waveforms

■ AM, FM and FSK modulation

■ 10 mVpp to 10 Vpp into 50 Ω

■ Large graphical LCD shows a detailed output

waveform representation

■ Fully programmable markers

■ Fully protected output

■ Closed case calibration

■ Arbitrary waveform editing software included

■ SCPI compliant command set

■ GPIB and RS-232 interfaces (standard)

■ Both channels offer full functionality. All wave

form parameters such as frequency, amplitude

and offset can be set independently

■ Synchronize both output signals to the same

clock signal (external or internal) and precisely

adjust the phase relationship between the two

signals

■ Economical baseband I/Q signal source

■ Saves cost and bench space

4076

4079

Technical data subject to change

Summary of content (4 pages)

PAGE 1
Data sheet 50 MHz Arbitrary Waveform/ Function Generators Models 4076 & 4079 Common Features & Benefits ■ 14-bit, 125 MSa/s, 4,000 k point Arbitrary Waveform Generator ■ 50 MHz Sine / 50 MHz Square waveforms ■ Predefined Pulse, Ramp, Triangle, Noise, Sin (X)/X, Exponential and Gaussian waveforms ■ AM, ■ 10 FM and FSK modulation mVpp to 10 Vpp into 50 Ω ■ Large graphical LCD shows a detailed output waveform representation 4076 ■ Fully programmable markers ■ Fully protected output ■ Closed
PAGE 2
50 MHz Arbitrary / Function Generators Models 4076 & 4079 ▲ Front panel Informative LCD with detailed display of waveform parameters Easy-to-use keypad allows efficient parameter configuration Model 4079 allows for both independent and phase synchronized waveform generation Intuitive user interface These Waveform Generators use a menu-driven front panel keypad and control knob along with an easy-to-read graphical LCD to adjust all waveform parameters, which are visible at one glance.
PAGE 3
50 MHz Arbitrary / Function Generators Models 4076 & 4079 Flexible memory management Unlike other comparable generators, which typically contain only a few fixed-size memory locations for waveform storage, the 4076 and 4079 gives users more freedom - the 4,000,000 point flash memory can be allocated to one large waveform or up to 50 different waveforms, each with a customizable length.
PAGE 4
50 MHz Arbitrary / Function Generators Models 4076 & 4079 Specifications 4076 models 4079 Channels 1 Channel 2 Channels F r eq ue nc y Ch ar ac te ri stic s Sine 1 µHz to 50 MHz Square 1 µHz to 50 MHz Triangle, Ramp 1 µHz to 5 MHz Pulse 0.5 mHz to 25 MHz Accuracy 0.