User Manual
CHAPTER 3. OPERATION 11
3.1.2 Screen Capture
The display screen may be captured and saved as a .GIF file to an external USB flash drive.
1. Insert a USB flash drive into the front USB host port and wait for the USB icon to appear in the upper
right corner of the screen.
2. Press the buon.
A message prompt will say “Screen Copy .. . ”.
3. Wait until the message says “Copy completed.” and disappears.
The screenshot will be saved into the USB subfolder /PIC.
3.1.3 Reset Key
The reset key initiates a reboot of the system.
3.2 Menu Operation
1. Press the buon or the buon to access the display or setup menus.
2. At the boom of the screen, related so menu items are displayed. Use the function keys to select the
corresponding so menu times that are directly above them. Each item has its own unique display showing
setup parameters, measurements, and more.
3. Use the , , , or arrow keys to select the on-screen parameters of the [FILE] or [TOOLS]
menus. Selected items are highlighted in BLUE .
Figure 3.1: So Menu
4. Most on-screen parameters, when selected, will have options to select or change using the so menu at the
boom of the screen.
5. If an on-screen parameter is numeric, the keypad may be used to enter and change the values. Numeric
values are highlighted in RED , and additional items in the so menu will be available to set the units
(u, m, k, x1). To enter a negative value, press the buon first, and then enter the number. The
buon is also the backspace buon, and works in the usual way.