User Manual
CHAPTER 3. OPERATION 13
INCR++ Coarse adjustment - Increments the selected numeric value by the hundreds digit
(i.e. 100 will increase to 200)
INCR+ Fine adjustment - Increments the selected numeric value by the tens digit (i.e. 10
will increase to 20) or by the ones digit (i.e. 10 will increase to 11) depending on the
selected parameter.
DECR- - Coarse adjustment - Decrements the selected numeric value by the hundreds digit
(i.e. 200 will decrease to 100)
DECR- Fine adjustment - Decrements the selected numeric value by the tens digit (i.e. 20
will decrease to 10) or by the ones digit (i.e. 11 will decrease to 10) depending on the
selected parameter.
CLEAR The selected value will be set to 0.
CLEAR LINE The value of all parameters at the selected row/line will be set to 0.
Table 3.1: Coarse and Fine numeric adjustments
Figure 3.4: Increment/Decrement Values
3.3 System Setup Menu
The system menu is accessible by pressing the buon and selecting SYSTEM SETUP from the on-screen
menu.
In this menu, all parameters can be configured by using the arrow keys for selection, and the function keys or
numeric keypad to make changes.
Table 3.2 lists the configurable parameters in the system menu: Key sound, Remote Interface, Language, Baud
Rate, Password Protection, Bus Address, Date, Time.
3.3.1 System Tools
The system tools menu is accessed from the System Setup Display by pressing once, and then pressing
the key twice to select TOOLS. If the current selection is on a parameter, then use any of the arrow keys to
navigate to TOOLS. Selection of on-screen fields is always available, however, the selector may be hidden behind
the main screen label.
When TOOLS is selected, the so menu displays 3 options described in Table 3.3. Use the corresponding function