User Manual
CHAPTER 3. OPERATION 15
Parameter On-screen Label Description Options
Key Sound Key Sound
Enables/disables the beep sound aer any buon press.
Options: OFF, ON
Remote Interface Bus Mode
Selects the remote interface to use for remote communication.
See Section 5.1 for detailed operation instructions.
Options: RS232, GPIB, USBTMC, USBCDC
Language Language
Changes the language display.
Options: English, Chinese
Baud Rate Baud Rate
Selects the baud rate seing to use for remote communication
for RS232 and USBCDC interface options.
Options: 9600, 19200, 28800, 38400,96000, 115200
Password Protection Password
Enables/disables and configures password protection. See Sec-
tion 2.4 for more information.
Options: OFF, ON, Modify
GPIB Address Bus ADDR
The address of the GPIB interface.
Valid Range: 1 - 31
System Date Date
Sets the system date. The format is as follows: Year-Month-
Day (YY-MM-DD)
System Time Time
Sets the system time. The format is as follows: Hour-Minutes-
Seconds (HH-MM-SS)
Table 3.2: System Setup Parameters
Figure 3.7: System Tools
Parameter On-screen Label Description and Options
System Reset System Reset Reboot the instrument.
Default Seings Default Set
Change all seings to defaults and reboot. See Section 3.3.2 for
the default values.
Firmware Update Update
Using firmware loaded to a USB memory stick, update the
firmware of the instrument.
Table 3.3: System Tools Menu