Manualshelf

User Manual

ManualsBrandsB&K Precision ManualsElectrical & Electronic Test InstrumentsBattery Analyzer, 60 V
21222324252627282930
CHAPTER 3. OPERATION 20
3.6 Saving Measurement Data
The primary and secondary measurement readings are saved to an external USB drive.
1. Connect a USB flash drive to the USB host port on the front panel.
Note: The USB flash drive must be formaed to FAT16 or FAT32 file system.
2. Go to the TOOLS menu from Measurement Display screen, and select SAVE from the so menu.
3. When set to ON, primary and secondary measurements start saving to a .CSV file on the USB flash drive.
The file will be located inside a folder labeled CSV.
4. To stop saving, select SAVE from so menu to toggle OFF.