User Manual

CHAPTER 3. OPERATION 24
Parameter On-screen Label Description/Options
Primary Measurement
Reference Value
REF_A
Sets the reference value for the primary measurement when
displayed in ABS or % (See DEV_A parameter)
Valid Range: Dependent on the measurement range of the se-
lected primary function.
A MEAS option will appear in the so menu. Select this to set
the reference value to the last measured value. To update the
measured value, press
to go to the Measurement Display. Then, press
to go back to Measurement Setup and select REF_A and press
MEAS again.
Secondary Measurement
Reference Value
REF_B
Sets the reference value for the secondary measurement when
displayed in ABS or % (See DEV_A parameter)
Valid Range: Dependent on the measurement range of the se-
lected primary function.
A MEAS option will appear in the so menu. Select this to set
the reference value to the last measured value. To update the
measured value, press to go to the Measurement Dis-
play. Then, press to go back to Measurement Setup and
select REF_B and press MEAS again.
Table 3.8: Measurement Setup Parameters
3.8.2 Measurement Tools
Access the measurement tools menu from the Measurement Display by pressing once, and then press
twice to select TOOLS. If the current selection is on a parameter, use the arrow keys to navigate to TOOLS.
Figure 3.12: Measurement Tools Menu
When TOOLS is selected, the so menu has five configurable and selectable options. Use the corresponding
function keys to make a selection. See Table 3.9 for details.