User Manual

CHAPTER 3. OPERATION 35
Figure 3.24: Trace Cursor
Figure 3.25: Trace Min/Max
with the keypad, and then the function keys to select the units. See Table 3.14 for the parameters and their
options/range.
Parameter On-screen Label Description/Options
Measurement Mode Mode
Selects the measurement mode for the statistical measurement
function.
Options:%, ABS
% The high and low limits used for measurement is a tolerance
percentage.
Upper limit (Hi) = N ominal ∗ (1 + Upperlimit%)
Lower limit (Lo) = Nominal ∗ (1 + LowerLimit%)
ABS The high and low limits used for testing is an absolute
value of the selected parameter.
When selected, the Hi and Lo parameters will display [X] units,
where ‘X’ denotes the primary and secondary measurement
units when applicable (i.e. Ω, V, H, F, r(radians)).