User Manual
CHAPTER 4. FILE SYSTEM 41
Figure 4.2: Internal Memory Directory
Parameter On-screen Label Description/Options
Recall Instrument Seings Load Loads the selected .STA instrument seings file.
Copy File to External USB
Drive
Copy to E:
Copies the selected .STA instrument seings file to the external
USB flash drive /STA subfolder.
Delete File Delete Select to delete the selected .STA instrument seings file.
Table 4.2: Internal Memory Options
4.1 Save current seings
1. Enter all desired system seings to the instrument.
2. Navigate to the FILE menu on the <SYSTEM SETUP>screen.
3. Select where to save the seings, INTER or EXTER for internal or external memory respectively.
4. Use the arrow keys to navigate to a blank Folder/File location.
5. Select the SAVE so key.
6. Press yes to confirm you really want to save a file at that location.
7. Enter a name for the file using the arrow keys and by pressing ADD CHAR to enter the highlighted
character.
8. Press the ENTER so key when finished. The file is then saved.
4.2 Load saved seings to active seings
1. If the configuration is not in the internal storage, move it there.
2. Navigate to the “FILE” menu on the <SYSTEM SETUP>screen.
3. Select the storage location containing the “sta” file holding your system setup state.
4. Select the file and press “LOAD”.
5. Confirm “YES” to commit the selected file as the startup configuration.