User Manual

CHAPTER 4. FILE SYSTEM 43
Parameter On-screen Label Description/Options
Recall Instrument Seings Load
This option will load the selected .STA instrument seings file.
Note: The selected file must have a .STA file extension and is located
inside the /STA subfolder of the drive.
Copy File to
Internal Memory
Copy to I:
Select this to copy the selected .STA instrument seings file to the
internal memory of the instrument.
Delete File Delete Delete the selected file.
Enter Sub Directory Sub Dir Enter the selected sub folder.
Browse Root Directory Parent Dir Go back to the root directory of the drive.
Table 4.3: Save/Recall Instrument Seings
4.4 Save/Recall Instrument Seings
Instrument seings including all measurement setup seings, BIN setup seings, Trace setup seings, and system
setup seings, can be stored and recalled to and from internal memory.
4.4.1 Save seings to internal memory
1. Select FILE menu from any display, and then select INTER File from the so menu.
2. Use the keys to browse and select an empty location in the internal memory directory. A Save
option will appear in the so menu when an empty location is selected.
3. Press Save using the corresponding function key, and confirm by pressing Yes in the so menu.
4. The message prompt then shows “Input FileName:”, and an on-screen so keyboard will be displayed,
prompting for a file name to save the instrument seings to.
5. Use the keys to navigate the so keyboard. The character highlighted in BLUE is the
selected character. Press Add Char to add the selected character to the file name. Repeat selection and
enter the complete file name.
6. Select Enter from the so menu when finished. The file is then saved to internal memory. The saved file
includes the date and time.
Recall seings from internal memory
1. Select the FILE menu from any display, and then select INTER File option from the so menu.
2. Use the arrow keys to browse and select seing files from the internal memory directory. Once the
desired file is selected, press the Load option from the so menu.
3. The message prompt will ask for confirmation of this action. Select Yes to recall the seings.
4. The recalled file will have a check mark in the Load column. The check mark identifies the file
containing the current instrument seings.
5. The so menu Load option will change to UnLoad when the file with the is shown.
6. To clear the and unset the seing file as default, select the Unload option from the so menu.