User Manual

1
1 General Information
1.1 Product Overview
B&K Precision models 9115, 9115-AT, 9116, and 9117 are multi-range single output high power
supplies with the capability of producing up to 80 V or 60 A (9115/9115-AT), 150 V or 30 A
(9116), and 80 V or 120 A (9117) at a maximum power output of 1200 W (3000 W for 9117).
With an easy-to-read VFD display, user-friendly controls and a numeric keypad that allows for
easy configurations from the front panel. Standard RS232, USB, GPIB, RS485, and Ethernet
(9117 only) interfaces included on the rear panel provide flexibility for remote operation of the
power supply. Its compact 1U (2U for 9117) size form factor makes it ideal for use in a standard
19-inch rack.
Features:
• Multi-ranging operation provides voltage and current flexibility
• Compact, high density 1U rackmount form factor (2U for model 9117)
• High programming and readback resolution of 1mV/1mA (2mV/3mA for model 9117)
• Standard USBTMC, GPIB, RS232, RS485, and Ethernet (model 9117 only)
• External analog interface with control and monitoring functions
• Master/Slave Mode for series and parallel connectivity
• Adjustable voltage slope (rise and fall time)
• Sequence programming (models 9115/9115-AT/9116 only)
• OVP and OPP protection
1.2 Package Contents
Please inspect the instrument mechanically and electrically upon receiving it. Unpack all items
from the shipping carton, and check for any obvious signs of physical damage that may have
occurred during transportation. Report any damage to the shipping agent immediately. Save the
original packing carton for possible future reshipment. Every power supply is shipped with the
following contents:
• 1 x 9115, 9115-AT, 9116, or 9117 Power Supply
• 1 x User Manual
• 1 x AC Power Cord (models 9115, 9115-AT, and 9116 only)
• 1 x Unterminated Power Cord (model 9117 only)
• 1 x AC Input Connector (model 9117 only)
• 1 x Certificate of Calibration
• 1 x Test Report
Verify that all items above are included in the shipping container. If anything is missing, please