User Manual

46
8. Once these two sequences are selected (active), press to see the following:
9. The display prompts the user to enter the number of times to repeat sequence #1 as
part of the program (list). In this example, use the current adjust knob or the numeric
keypad to enter 2. Press and the same prompt will immediately follow for
sequence #2. Enter 3 and then press .
10. Now it will display the following to confirm saving the program (list).
11. Press key to select Yes and press to save the program (list) into memory.
12. If stored successfully, the display will show a message Save Success! After a few
seconds, it will return to the LIST menu.
Recall and Run Program
Once the sequence(s) and program are configured and stored into memory, they can be recalled
and triggered to run.
Recall Program
Follow the steps below to recall a stored program from memory:
SAVE LIST
No Yes
SEQ REPEAT
Seq 1 Repeat: 1
FILE
Active Seq: 09876543YY