Datasheet

Programmable AC Power Sources
9800 Series
4
www.bkprecision.com
Sweep mode
The sweep function is ideal for testing the
efficiency of switching power supplies or
capturing the maximum operating power
requirements of the device under test.
User-defined voltage and frequency sweeps can
be created independently or combined. Up to 10
sweep profiles can be stored and recalled.
Dimmer simulation
The dimmer feature can be used for many test applications such as motor control and lighting. By
controlling the phase cut-off of the AC sine wave’s leading or trailing edge, the dimmer simulation varies
the RMS voltage supplied to the load under test. The phase cut-off can be adjusted for leading or trailing
edge dimming between 0 to 180 degrees.
Application software
PC software is provided for front panel emulation, generating and executing list, PLD, and sweep profiles,
or logging measurement data without the need to write source code.
Trailing Edge Dimmer at 60°Leading Edge Dimmer at 90°
Supports NI Data
Dashboard for
LabVIEW
Voltage Sweep
Frequency Sweep
Voltage plus Frequency Sweep