User Manual

26
Restoring the instrument to factory default will change all current instrument
settings back to their default values.
1. From the SYSTEM menu, select Init and press
EnterEnter
.
2. There are two options:
Esc – This option will exit the menu.
Enter – The instrument will return to the main display and all settings are now restored
back to factory default. The table below lists some of the factory default settings.
Table 3 - Factory Default Settings
Voltage
0.0 V
Frequency
50.0 Hz
Start Phase
0.0
Stop Phase
0.0
Range
Auto
Power-Out Setting
Off
Power-On Setting
Sav0
Key Sound
ON
Trigger Source
Manual
Communication Interface
RS232
RS232 Settings
9600, 8, N, 1
LAN Settings
Gateway: 192.168.0.1
IP: 192.168.0.125
Mask: 255.255.255.0
Socket Port: 30000
Volt-Min
0.0 V
Volt-Max
300.0 V
Freq-Min
45.0 Hz
Freq-Max
500.0 Hz
Irms-Protect
3.000 A, Delay (max RMS
current)
BNC-Set
I-Trigger
Ipeak-Protect
12.00 A, Delay (max peak
current)
Dimmer Setting
Off
List-Set
On/Off
Output
Disabled