Datasheet

Make sure to visit
our Website
http://www.sefram.fr
Sefram
Sefram
ELDITEST
CP6000 series
AC/DC Oscilloscope Clamp On Current Probes
Capabilities
• 4 Model family for all applications :
300kHz / 500kHz / 1MHz / 1,5MHz
• Dual sensitivity ranges
• Offset adjustment
• Over range indicator
• Main adaptor included or battery powered
•
Possible use with a multimeter (with adaptor supplied)
• Safety : CAT II - 600V and CAT III - 300V
Current: up to 100A
Bandwidth: up to 1,5MHz
The new AC/DC oscilloscope clamp on current probes have been
designed to extend the functionnality of any general purpose
oscilloscopes. Bandwidth starts at 300kHz up to 1,5MHz, and cur-
rents measurements up to 100A.
New family of performance
ocilloscope current probe
The compact body and slim jaw allows to use these probes for
electronic circuits. All AC and DC measurements are possible with
large dynamic range.
Compact stylish body
and jaw
Selection guide - CP6000 series
The CP6000 series is supplied with a complete set of accessories,
which allows to use with main adaptor or battery powered, with
oscilloscope or DMM.
A complete set of accessories
CP6220 CP6550 CP6770 CP6990
Current ranges 10 A – 100 A 5 A – 50 A 7 A – 70 A 4 A – 40 A
Output level 100 mV/A – 10 mV/A 200 mV/A – 20 mV/A 500 mV/A – 50 mV/A 1 V/A – 100 mV/A
Bandwidth DC – 300 kHz DC – 500 kHz DC – 1 MHz DC – 1.5 MHz
Max. cable diameter 11mm 11mm 10.3mm 10.3mm
probe with accessories
Up to 1.5MHz
bandwidth