Owner manual

48
Command Syntax
TRACe:TIMer <NRf>
Parameters
0.0002 to 3600s | MINimum | MAXimum | DEFault
Unit
S (second)
*RST Value
1
Examples
TRAC:TIM 0.1
Query Syntax
TRACe:TIMer? [MINimum | MAXimum | DEFault]
Returned Parameters
<NR3>
Source Commands
These commands control the input of the electronic load. The INPut and OUTput commands are
equivalent. The CURRent, RESistance, and VOLTage commands program the actual input current,
resistance, and voltage.
[SOURce:]INPut:ALL
This command enables or disables all the inputs of the module. The state of a disabled input is a high
impedance condition.
Command Syntax
[SOURce:]INPut:ALL[:STATe] <bool>
Parameters
0 | 1 | OFF | ON
Examples
INP:ALL 1
[SOURce:]INPut
Channel Specific
This command enables or disables the electronic load inputs. The state of a disabled input is a high
impedance condition.
Command Syntax
[SOURce:]INPut[:STATe] <bool>
Parameters
0 | 1 | OFF | ON
*RST Value
OFF
Examples
INP 1
Query Syntax
INPut[:STATe]?
Returned Parameters
0 | 1
Related Commands
*RCL *SAV