Owner manual

49
[SOURce:]INPut:SYNCon
Channel Specific
This command enables or disables to change the electronic load inputs when INP:ALL command is
received.
Command Syntax
[SOURce:]INPut:SYNCon[:STATe] <bool>
Parameters
0 | 1 | OFF | ON
*RST Value
ON
Examples
INP:SYNC 1
Query Syntax
INPut:SYNCon[:STATe]?
Returned Parameters
0 | 1
Related Commands
INP:ALL
[SOURce:]INPut:SHORt
Channel Specific
This command programs the specified electronic load module to the maximum current that it can sink
in the present operating range.
Command Syntax
[SOURce:]INPut:SHORt[:STATe] <bool>
Parameters
0 | 1 | OFF | ON
*RST Value
OFF
Examples
INP:SHOR 1
Query Syntax
INPut:SHORt:STATe?
Returned Parameters
0 | 1
Related Commands
INP
[SOURce:]REMote:SENSe
Channel Specific
This command is used to select the remote measure mode for the load.
Command Syntax
[SOURce:]REMote:SENSe[:STATe] <bool>
Parameters
0 | 1 | OFF | ON
*RST Value
0
Examples
REM:SENS 0