Owner manual

SOURce Command Summary

Commands Description Default

Channel

Specific

[:SOURce]

:INPut

[:STATe] Set selected channel’s input state. OFF Y

[:STATe]? Query selected channel’s input state. Y

:ALL Set all channels’ input states. N

:SHORt Set selected channel’s load short state. OFF Y

:SHORt? Query selected channel’s load short state. Y

:SYNCon Set the ON/OFF state for trace mode. Y

:SYNCon? Query the ON/OFF state for trace mode. Y

:TIMer

[:STATe] Set the timer ON/OFF state. Y

[:STATe]? Query the timer ON/OFF state. Y

:DELay Set the delay time for timer. Y

:DELay? Query the delay time for timer. Y

:REMote

:SENSe Set the remote sense ON/OFF state. Y

:SENSe? Query the remote sense ON/OFF state. Y

:FUNCtion <name>

Set electronic load’s regulation mode

(VOLTage, CURRent, RESistance, POWer,

IMPEDANCE).

CURRent Y

:MODE <name>

Set electronic load’s input mode (FIXed or

LIST).

FIXed Y

:MODE? Query electronic load’s input mode. Y

:FUNCtion? Query electronic load’s regulation mode. Y

:TRANsient

[:STATe]

Enable or disable transition mode.

OFF Y

[:STATe]? Query electronic load’s transition mode. Y

:CURRent